Autoclave

Constructional And Salient Features :

• Double walled unit horizontally mounted on a sturdy, heavy M.S. duly painted or stainless steel tubular stand.
• Both inner chamber and outer wall made of S.S.
• Pressure is adjustable from 10-20 psi.
• Fitted with pressure gauge, safety valve and steam release valve.
• Available with separate boiler.
• For units fitted with S.S. Boiler, separate valves for injecting the steam into the main chamber and releasing the steam in atmosphere after use are provided.
• Automatic vacuum breaker is provided to break the vacuum in case of formation of vacuum due to steam condensation.

Control Panel And Switchgears :

• Automatic Low Water Level Cut-Off Device fitted for general safety of the element.
• Fitted with Automatic Pressure Control Switch.
• Fitted with dial thermometer to indicate the inner chamber temperature.
• Lid is made of thick machined Mild Steel plate lined with stainless steel from inside
• Supplied without jacket (Double walled chamber with separate boiler).
• Industrial grade energy efficient heaters reduce power bills drastically.

Application :

• Fully Automatic Vertical Autoclave are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
• These are fully automatic models requiring no human intervention till a full sterilization cycle is over.

Constructional And Salient Features :

• Inner & outer wall both made of Stainless Steel.
• Lid is made of thick machined Stainless Steel plate.
• Supporting ring and legs are also made Stainless Steel.
• Gasket is made from imported Silicon rubber.
• Fitted with Semi-Automatic Digital Controller with AUTO-TIME CONTROL SYSTEM. After the set temperature is attained the timer starts automatically and on completion of set count down / up time the supply to heaters is cut -off and the system sounds a buzzer alerting user that the cycle is over.
• Fitted with microprocessor based fully automatic fuzzy logic control system with timer buzzer (Auto Time Control). The unit is also fitted with low-water level cut-off as a standard feature.
• Fitted with automatic purging and exhaust valve.
• Radial locking lid ensures user safety and safe locking.
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, extra Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
• Drain Valve facilitates easy cleaning of the chamber.
• Moulded jointless silicon rubber gasket.
• All internal joints are argon arc welded, ground and polished to give crevice free internals.

Control Panel And Switchgears :

• Processor based Controller with time and temperature settable by user.
• Class 'A' Platinum (Pt-100) sensor, enabling precise and accurate monitoring.
• Low water level alarm and cut off for safety of heater.
• Sensor open alarm and display.
• End of cycle buzzer to alert the user and auto reset.
• Miniature Circuit Breaker for MAINS On/Off plus safety of control panel.
• Solenoid Valve for automatic purging and exhaust (user settable).
• Industrial grade energy efficient heaters reduce power bills drastically.

Options:

• Digital Pressure Indicator displayed directly into the main control panel.
• Class 5 Emulating Indicator (pack of 400 strips).

Features :

• Inner made of Stainless Steel and outer made of(mild steel) Electro galvanized steel Duly Powder Coated Sheet enamel painted.
• Heaters cover stand and bucket are made of Stainless Steel Sheet.
• Lid is made of Electro galvanized steel Duly Powder Coated plate lined with stainless steel from inside.
• Supporting Ring & Legs are made of Electro galvanized steel Duly Powder Coated duly enamel painted.
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve and water level indicator.
• Drain Valve facilitates easy cleaning of the chamber.
• Gasket is made of neoprene.
• All internal joints are argon arc welded.
• Piezostat (Pressure Control Switch & Low water Level Cut Off system for general safety of the element are available at an extra cost. (OPTION)
• Operating range from 15psi to 20 psi pressure.
• To work on 220/230Volts, 50/60 Hz AC supply.

Sailent Features:
Used for sterilization under saturated steam pressure at any selected point between15 to 22 psi (adjustable), however this can be used for higher pressure up to 22 psi.
Working temperature of 121 0 C.
These Triple walled units have inner chamber and (Boiler) made of stainless steel SS 304 / SS 316 grade (as per demand).
Outer wall is covered with stainless steel sheet.
Thick stainless steel lid is tightened by radial locking system and can be lifted through a pedal lifting device for user comfort
Fitted with joint less neoprene rubber gasket.
Systems are hydraulically tested up to 40 p.s.i. as a Safety Measure.
All autoclaves are fitted with standard accessories such as water indicator water level gauge, pressure gauge, steam release cock, spring loaded safety valve, Vacuum Breaker, pedal lifting device and heating element.
Space between boi ler and outer shell works as air insulation however we may incorporate mineral glass wool insulation if customer desires.
Heating is done through specially designed water heaters of suitable wattage to ensure optimum sterilization time in every sterilization cycle.
Supplied complete with S.S. basket, cord and plug.
Supplied with cord and plug to work on 220/230 volts A.C. Supply.

Application :

• Fully Automatic Vertical Autoclave are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
• These are fully automatic models requiring no human intervention till a full sterilization cycle is over.

Construction & Salient Features :

• Inner chamber, outer chamber and support ring are fully made of stainless steel (SS-304 grade).
• Heaters cover stand and carrier/bucket are made of Stainless Steel.
• Lid made of thick machined Stainless Steel plate.
• Radial locking lid ensures user safety and safe locking.
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, extra Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
• Drain Valve facilitates easy cleaning of the chamber.
• Moulded jointless silicon rubber gasket.
• All internal joints are argon arc welded, ground and polished to give crevice free internals.
• µProcessor based Controller with time and temperature programmable by user.
• Class 'A' Platinum (Pt-100) sensor, enabling precise and accurate monitoring.
• Low water level alarm and cut off for safety of heater.
• Sensor open alarm and display.
• End of cycle buzzer to alert the user and auto reset.
• Miniature Circuit Breaker for MAINS On/Off plus safety of control panel.
• Solenoid Valve for automatic purging and exhaust (user settable).
• Industrial grade energy efficient heaters reduce power bills drastically.

Applications:

Standard models of Vertical autoclave units manufactured by Sai Technology are available with chamber volumes of 20 liters to 150 liters that accommodate two and three drums accordingly. These systems are designed for meeting effective sterilization requirements in bacteriological and research laboratories, hospitals and clinics and food and beverage units. The vertical chamber design maximizes space utilization, while microprocessor control system enables comfortable working all the time you operate the machine.

Also called v steam sterilizers Vertical, our vertical type autoclaves deliver flexible solutions of steam sterilization in hospitals,

clinics and other areas of application, where reliable steam sterilization is a mandatory process. Vertically designed chamber provides guaranty of safe and efficient sterilization even in confined spaces. In order to suit specific application, these units are fabricated as fully GMP stainless steel double walled construction; in addition, we also manufacture vertical autoclaves with other configurations, which include stainless steel inner and exterior made of Stainless Steel (SS).

The most important feature that keeps our range of vertical autoclaves top of others is meeting all relevant guidelines and standards such as NABH standards. As an option, we also provide IQ / OQ / PQ calibration documentation with extra cost. These systems are fully customizable and provided with large scope of customization; to meet individual budget, we can equipment your

vertical autoclave with a number of optional accessories such as temperature chart recorder, digital temperature indicator, PID

Controller and provision to attach a dot matrix printer.